The mistake of many owners of garden equipment is to believe that when choosing belts for a walk-behind tractor, you can seriously deviate from the manufacturer’s requirements. Yes, if the difference with the recommended characteristics is not significant, the unit will work. However, the belt itself wears out quickly. So it will have a negative effect on the engine and gearbox all the time, because the calculated load will go on them. Another frequent mistake, which is caused by a superficial attitude to the selection of spare parts, is buying the wrong gasket for a motoblock at https://motoblok-tata.com.ua. This material provides guidance on how to avoid miscalculations in these cases.
Choosing a belt for a walk-behind tractor
The simplest and most accurate way to determine the optimal product is to focus on the inscriptions applied to the factory working part that needs to be replaced. However, sometimes the text on the worn part cannot be read. In addition, there are several labeling systems, and identical products can be hidden under different names. A worn belt for a walk-behind tractor has the following characteristics that should be studied:
The length is internal (Li) and external (Ld). It should be taken into account that old belts for walk-behind tractors may differ in size from new ones by 10%. This difference is compensated by the tension pulley.
Crossing. The two most popular formats are wedge-shaped and toothed. In both cases, it is necessary to measure the base (width at the top) and height in millimeters.
With the received data, you can already contact the online store so that the manager determines the standard size of the belt for the walk-behind tractor. In most cases, these data will not be needed, since the seller can offer the right option, provided that you name the model of the unit, and it will be a popular garden machine.
Preference should be given to belts for walk-behind tractors, which are manufactured by or approved by the original manufacturer of agricultural machinery. The products of well-known brands will also be a good choice, but in this case the prices will be inflated.
Selection of spacers for a walk-behind tractor
Gaskets on the walk-behind tractor are a mandatory part of many units and units. The main areas in which they are needed are the cylinder head, cooling system, shafts, engine pallets. According to the format, these can be both standard gaskets and oil seals (cuffs), which are designed to separate different environments and protect the metal from oxidation. Despite the variety of shapes and sizes, the rules for a successful purchase are the same for all of them:
move away strictly from the marking of the engine (carburetor, manifold, etc.);
choose gaskets for a walk-behind tractor from proven manufacturers;
don’t trust too low prices.
Important: any gaskets for a walk-behind tractor are recommended to be used once. After disassembling and assembling the nodes, they can no longer guarantee the tightness of the connections. It is easy to pick up new gaskets for a motoblock on the website of the Motoblok-TATA online store (delivery within Ukraine is available).
Author: Igor Stepanenko (Motoblok-Tata expert).